Audi 100

1982-1990 of release




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
- 11. A body
   11.1. Removal and installation of the forward buffer
   11.2. Removal and installation of facing of a radiator
   11.3. Removal and cowl installation
   11.4. Adjustment of a cable of the lock of a cowl
   11.5. Replacement Lochar
   11.6. A forward wing
   11.7. Replacement molding
   11.8. Replacement of a sealant of glass of a door
   11.9. A door upholstery (cars of release till December, 1987)
   11.10. Replacement of glass of a door and window lifter
   11.11. Removal and door installation
   11.12. The external handle of a door
   11.13. The door lock
   11.14. Adjustment of the lock of a door
   11.15. Removal and installation window lifter with the electric drive
   11.16. Removal and installation of an external rear-view mirror
   11.17. Replacement of a reflecting element of an external rear-view mirror
   11.18. Repair heating an element of back glass
   11.19. Removal and installation of the back buffer
   11.20. Removal and installation of a cover of a luggage space
   11.21. Removal and installation of the lock of a cover of a luggage space
   11.22. Replacement of a back decorative overlay with a niche under licence plate
   11.23. Removal and installation of the central console
   11.24. Clearing of drains (on the models equipped with the hatch)
   11.25. Removal and heater installation
+ 12. An electric equipment





11.3. Removal and cowl installation
PERFORMANCE ORDER
1. To open a cowl.
2. To mark an arrangement of arms of loops concerning a cowl, having led round them, for example, a felt-tip pen.
3. At a gas emphasis with a plastic tip to extend by means of a screw-driver fixing clip on 4 mm (completely not to pull out!) and to remove a tip of a rod of a gas emphasis from a spherical finger.
4. At a gas emphasis with a metal tip to take out by means of flat-nose pliers a pin and to remove a tip of a rod of a gas emphasis from a spherical finger.
5. To turn away bolts of fastening of loops to a cowl from both parties.
6. To remove a cowl. It is desirable to do it together, as a cowl heavy enough.
7. To establish a cowl and to wrap bolts of fastening by a hand without tightening.
8. To connect the bottom fastenings of a gas emphasis.
9. To expose a cowl on earlier made labels and definitively to tighten fastening bolts.
10. If the new cowl is established and labels before removal have not been made, it is necessary to adjust cowl position.
11. For this purpose before a definitive inhaling of bolts of fastening of loops to a cowl to cover a cowl and to establish it so that backlashes between a cowl and wings were identical from both parties, and the backlash between the bottom panel передка and a back part of a cowl was uniform on all extent.
12. After that accurately to open a cowl and definitively to tighten fastening bolts.