Audi 100

1982-1990 of release




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
- 11. A body
   11.1. Removal and installation of the forward buffer
   11.2. Removal and installation of facing of a radiator
   11.3. Removal and cowl installation
   11.4. Adjustment of a cable of the lock of a cowl
   11.5. Replacement Lochar
   11.6. A forward wing
   11.7. Replacement molding
   11.8. Replacement of a sealant of glass of a door
   11.9. A door upholstery (cars of release till December, 1987)
   11.10. Replacement of glass of a door and window lifter
   11.11. Removal and door installation
   11.12. The external handle of a door
   11.13. The door lock
   11.14. Adjustment of the lock of a door
   11.15. Removal and installation window lifter with the electric drive
   11.16. Removal and installation of an external rear-view mirror
   11.17. Replacement of a reflecting element of an external rear-view mirror
   11.18. Repair heating an element of back glass
   11.19. Removal and installation of the back buffer
   11.20. Removal and installation of a cover of a luggage space
   11.21. Removal and installation of the lock of a cover of a luggage space
   11.22. Replacement of a back decorative overlay with a niche under licence plate
   11.23. Removal and installation of the central console
   11.24. Clearing of drains (on the models equipped with the hatch)
   11.25. Removal and heater installation
+ 12. An electric equipment


Химчистка диванов: https://skifcleaning.com



11.6. A forward wing
THE GENERAL DATA

The bottom back fastening of a forward wing

1, 2 – the screw;

3 – a washer

The top fastening of a forward wing

1 – a bolt;

2 – a forward wing

Removal

PERFORMANCE ORDER
1. To remove the forward buffer (subsection 11.1 see) and локарь (subsection 11.5 see).
2. To remove a forward overlay of a wing.
3. To remove the turn index (subsection 12.1.5.6 see).
4. To disconnect lateral fastening of the bottom spoiler so that to get access to screws (1, 2).
5. To turn out screws of fastening of a wing.
6. To turn out the screw (1) fastenings of a wing.
7. To open a door and to turn out the screw (1) fastenings of the wing, located over a door loop.
8. To turn out from below a wing two screws.
9. Through a wheel niche to turn out the screw of fastening of an arm to a forward rack.
10. To open a cowl and to turn away bolts of the top fastening of a wing.
11. To remove a wing from the car.

Installation

PERFORMANCE ORDER
1. To clear surfaces on a wing and a body in places of their connection.
2. To put in junctions of a wing with a body a hermetic layer.
3. To establish a wing and to wrap bolts of its top fastening.
4. To screw other screws of fastening of a wing. Thus to watch correct installation of washers.
5. To screw the screw (1).
6. To screw the screw (1), having opened a door.
7. To establish into place the bottom spoiler.
8. To establish the turn index.
9. To establish локарь and the forward buffer.
10. To establish a wheel and наживить bolts of its fastening.
11. To lower the car on the earth and definitively to tighten bolts of fastening of a wheel in regular intervals on diameter the moment 110 Н·м (11,0 кгс·м).