Audi 100

1982-1990 of release




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
- 3. Engines
   - 3.1. Four-cylinder engines
      3.1.1. Removal and engine installation
      - 3.1.2. Dismantling and engine assemblage
         3.1.2.1. Removal and installation of a head of the block of cylinders
         3.1.2.2. Removal of a camshaft and pushers of valves
         3.1.2.3. Camshaft survey
         3.1.2.4. Definition of a technical condition of hydropushers of valves
         3.1.2.5. Installation of a camshaft and pushers of valves
         3.1.2.6. Removal and installation of valves (dismantling of a head of the block)
         3.1.2.7. Survey, Troubleshooting and repair of details of a head of the block of cylinders
         3.1.2.8. Backlashes between cams of a cam-shaft and pushers of valves
         3.1.2.9. A camshaft drive
         3.1.2.10. Removal and installation of an intermediate shaft
         3.1.2.11. Removal and flywheel installation
         3.1.2.12. Replacement of epiploons of a cranked shaft
         3.1.2.13. Removal and installation oil картера
         3.1.2.14. Removal, check and installation of the oil pump
         3.1.2.15. Dismantling of shatunno-piston group
         3.1.2.16. Survey and check of details of shatunno-piston group
         3.1.2.17. Assemblage of shatunno-piston group
         3.1.2.18. Removal, survey and installation of a cranked shaft
   + 3.2. Five-cylinder engines
   + 3.3. The diesel engine
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment





3.1.2.12. Replacement of epiploons of a cranked shaft Forward epiploon

PERFORMANCE ORDER
1. To remove a belt of a drive of a camshaft and a cogwheel of a cranked shaft (subsection 3.1.2.9 subitem 1-10 see).
2. To turn out bolts of fastening of the holder 6 epiploons (fig. the Cranked shaft and the block of cylinders see). To remove the holder of an epiploon and a lining 7.
3. To take out an old epiploon 5 of the holder.
4. Press in a new epiploon, preliminary having greased with its engine oil.
5. To establish the holder of an epiploon into place, having replaced a lining.
6. To tighten bolts in regular intervals on a diagonal the moment 20 Н·м (2,0 кгс·м).
7. To establish a cogwheel of a cranked shaft and a belt of a drive of a camshaft.

Back epiploon

PERFORMANCE ORDER
1. To remove a flywheel (subsection 3.1.2.11 subitem 1-2 see).
2. To remove the holder of a back epiploon with an epiploon and a lining
3. To take out an old epiploon from the holder and to clear a place of its landing.
4. Press in a new epiploon, preliminary having greased with its engine oil.
5. To establish the holder of an epiploon into place, having replaced a lining.
6. In regular intervals on a diagonal to twirl bolts and to tighten the moment 10 Н·м (1,0 кгс·м).
7. To establish a flywheel.