Audi 1001982-1990 of release |
|
Audi 100 - 1.1. Controls and devices + 1.1.1. Models of release till January 1988 г + 1.1.2. Models of release since January 1988 г 1.2. Glass lifts with the electric drive 1.3. An external rear-view mirror with the electric drive 1.4. An internal rear-view mirror 1.5. A cowl 1.6. Forward seats with mechanical adjustment 1.7. Forward seats with the electric drive 1.8. Transportation of lengthy subjects + 1.9. Engine start 1.10. Safety measures at an engine stop 1.11. Cruise-control 1.12. Heating and ventilation 1.13. The control panel the conditioner 1.14. The onboard computer 1.15. Management of the onboard computer on models of release till January, 1988 1.16. Blocking of the internal handle of the lock of a back door 1.17. Обкатка the car 1.18. Car check before departure 1.19. Replacement of operational liquids and lubricants + 1.20. Servicing of cars of release till August, 1985 + 1.21. Servicing of cars of release since August, 1985 1.22. Periodicity of greasing of knots of the car + 2. Technical characteristics + 3. Engines + 4. Cooling system + 5. An exhaust system + 6. The power supply system + 7. Transmission + 8. A running gear + 9. A steering + 10. Brake system + 11. A body + 12. An electric equipment |
1.18. Car check before departure
Daily before departure from garage it is necessary to check up: 1. Pressure of air in tyres and if necessary to finish to norm. 2. Oil level in crankcase the engine. It should be between labels min and max on the index (probeе) oil level. If level below a label min to add oil in the engine. It is necessary to add oil of the same mark what is filled in in картер the engine. To watch, that oil level in crankcase kept about a label max. Not to fill in oil above a label max: it will lead to the raised expense of oil. 3. Liquid level in system of cooling of the engine. Level of a cooling liquid should be about a label on a broad tank. If necessary to add cooling liquid in a broad tank. 4. Level of a brake liquid in a tank of the main cylinder of a brake. It should be above a label min. If necessary to add a liquid in a tank to a mark max. 5. To examine hoses and tubes of power supply systems, coolings and engine greasings. Подтекания the fuel, the cooling liquid and oil should not be. If there are traces подтекания, to tighten collars of fastening of hoses. 6. Serviceability of working brake system and a lay brake. 7. Serviceability of instrumentations, a screen wiper, a washer of a windscreen, headlights, indexes of turns and back lanterns. This check spend at the working engine. |
|