Audi 100

1982-1990 of release




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
- 8. A running gear
   - 8.1. A forward suspension bracket
      8.1.1. A telescopic rack
      8.1.2. Shock-absorber replacement
      8.1.3. Removal and installation of the stabilizer of cross-section stability
      8.1.4. A nave of a forward wheel
   + 8.2. A back suspension bracket
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment





8.1.4. A nave of a forward wheel

Dismantling and assemblage

PERFORMANCE ORDER
1. To remove a telescopic rack (subsection 8.1.1 see).
2. To turn away bolts of fastening and to remove a brake board.
3. Выпрессовать by means of a stripper a nave of a wheel from the bearing established in a rotary fist.
4. To remove on one lock ring from both parties of a rotary fist.
5. Выпрессовать the bearing of a nave from a rotary fist.
6. To collect a nave upside-down. At запрессовке the bearing on a flange of a nave effort to apply only on an internal ring of the bearing. Bolts of fastening of a brake board to tighten the moment 10 Н·м (1,0 кгс·м). After assemblage to establish a telescopic rack into place.