| 1. To lower pressure in the power supply system (subsection 6.2.2 item 3 see). |
| 2. To mark and disconnect fuel lines from the fuel distributor (fig. Basic elements of system of injection of fuel see), having turned away fastening bolts. |
| 3. To turn away three screws of fastening of the distributor and to remove the distributor. Thus to watch, that from below of the case has not dropped out плунжер. If плунжер has casually dropped out, to wash out it in gasoline and to insert into the distributor case the open end downwards. |
| 4. To establish the distributor upside-down, having replaced a sealing ring of the case of the distributor. Before distributor installation to check up, that плунжер freely moved upwards-downwards. Screws of fastening of the distributor законтрить a paint. |