Audi 100

1982-1990 of release

Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
- 12. An electric equipment
   - 12.1. Electric equipment system
      12.1.1. A technical characteristics
      12.1.2. Safety locks, the relay and management blocks
      - 12.1.3. The generator Removal and generator installation Dismantling and generator assemblage Check, survey and Troubleshooting generator details Adjustment of a tension of a belt of a drive of the generator
      + 12.1.4. A starter
      + 12.1.5. Illumination and the light alarm system
   + 12.2. Ignition system
   + 12.3. Electric schemes Removal and generator installation
1. To disconnect a wire from "the minus" plug of the storage battery.
2. To disconnect from generator plugs electric wires, preliminary having marked them.
3. To weaken an inhaling of bolts of fastening of the generator to an arm both an adjusting lath and a bolt of fastening of an adjusting lath.
4. To turn the generator to the engine block, to weaken a belt tension.
5. To remove a generator belt.
6. To turn away bolts of the top and bottom fastening of the generator.
7. To remove the generator.
8. To establish the generator upside-down. After that to adjust a tension of a belt of a drive (subsection see). To tighten bolts of fastening of an adjusting lath and the generator to an adjusting lath the moment 20 Нм (2,0 кгсм), and a bolt of fastening of the generator to an arm the moment 30 Нм (3,0 кгсм).