Audi 100

1982-1990 of release




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
- 11. A body
   11.1. Removal and installation of the forward buffer
   11.2. Removal and installation of facing of a radiator
   11.3. Removal and cowl installation
   11.4. Adjustment of a cable of the lock of a cowl
   11.5. Replacement Lochar
   11.6. A forward wing
   11.7. Replacement molding
   11.8. Replacement of a sealant of glass of a door
   11.9. A door upholstery (cars of release till December, 1987)
   11.10. Replacement of glass of a door and window lifter
   11.11. Removal and door installation
   11.12. The external handle of a door
   11.13. The door lock
   11.14. Adjustment of the lock of a door
   11.15. Removal and installation window lifter with the electric drive
   11.16. Removal and installation of an external rear-view mirror
   11.17. Replacement of a reflecting element of an external rear-view mirror
   11.18. Repair heating an element of back glass
   11.19. Removal and installation of the back buffer
   11.20. Removal and installation of a cover of a luggage space
   11.21. Removal and installation of the lock of a cover of a luggage space
   11.22. Replacement of a back decorative overlay with a niche under licence plate
   11.23. Removal and installation of the central console
   11.24. Clearing of drains (on the models equipped with the hatch)
   11.25. Removal and heater installation
+ 12. An electric equipment





11.21. Removal and installation of the lock of a cover of a luggage space
PERFORMANCE ORDER
1. To open a luggage space cover.
2. To turn away a nut of fastening and to remove the lock with linings from hairpins.
3. To disconnect draught from the lock lever, having wrung out the spring holder.
4. To disconnect the holder from a luggage carrier cover.
5. To disconnect draught from the lever of the case of the cylinder.
6. To remove a decorative ring.
7. To turn away two bolts of fastening and to remove the case of the switch of the lock with the cylinder.
8. For replacement of the cylinder of the lock it is necessary to take out a pin, to remove a washer and to take out the cylinder with the inserted key, the case of the cylinder and a spring from the case of the switch of the lock.
9. To put the lock upside-down.
10. To adjust the lock latch moving at the weakened bolts.