1982-1990 of release
- 1.1. Controls and devices
+ 1.1.1. Models of release till January 1988 г
+ 1.1.2. Models of release since January 1988 г
1.2. Glass lifts with the electric drive
1.3. An external rear-view mirror with the electric drive
1.4. An internal rear-view mirror
1.5. A cowl
1.6. Forward seats with mechanical adjustment
1.7. Forward seats with the electric drive
1.8. Transportation of lengthy subjects
+ 1.9. Engine start
1.10. Safety measures at an engine stop
1.12. Heating and ventilation
1.13. The control panel the conditioner
1.14. The onboard computer
1.15. Management of the onboard computer on models of release till January, 1988
1.16. Blocking of the internal handle of the lock of a back door
1.17. Обкатка the car
1.18. Car check before departure
1.19. Replacement of operational liquids and lubricants
+ 1.20. Servicing of cars of release till August, 1985
+ 1.21. Servicing of cars of release since August, 1985
1.22. Periodicity of greasing of knots of the car
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
+ 6. The power supply system
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment
Adjustment of a seat with the electric drive
Command keys a memory
Switches for adjustment are located on facing of a sled from an outer side.
At moving of the switch 1 upwards the forward part of a pillow of a seat rises, at switch moving downwards – falls.
For seat adjustment in a longitudinal direction and on height the switch 2 move to one of four positions: I – the seat moves upwards; II – the seat moves back; III – the seat moves downwards; IV – the seat moves forward.
At moving of the switch 3 upwards the back part of a pillow of a seat rises, at switch moving downwards – falls.
At moving of the switch 4 forward the seat back rises, at switch moving back – falls.
By means of a memory it is possible to "remember" four positions of a seat. To "remember" the established position of a seat, it is necessary to press simultaneously a key 1 Memory and one of keys 2.
For a call of demanded position of a seat from "memory" to establish a key of the switch 3 in position ON, then to choose demanded position, having pressed accordingly one of keys 2. To translate a key of the switch 3 in position OFF.