Audi 100

1982-1990 of release




Audi 100
+ 1.1. Controls and devices
+ 2. Technical characteristics
+ 3. Engines
+ 4. Cooling system
+ 5. An exhaust system
- 6. The power supply system
   - 6.1. The power supply system of carburettor engines
      6.1.1. Replacement of a filtering element of the air filter
      6.1.2. Removal and installation of the air filter
      6.1.3. Temperature regulator check
      6.1.4. Check of the valve of a temperature regulator
      6.1.5. Removal and installation of the fuel pump
      6.1.6. Check of pressure of forcing of the fuel pump
      6.1.7. Removal and installation of a cable of a drive of an accelerator
      6.1.8. Adjustment of a cable of a drive of an accelerator
      6.1.9. Replacement of the gauge of level of fuel
      6.1.10. Removal and installation of a fuel tank
      6.1.11. Replacement of the filter of thin clearing of fuel
      6.1.12. Removal and carburettor installation
      + 6.1.13. Dismantling and carburettor assemblage
      + 6.1.14. Carburettor Pierburg adjustments 1B3
      + 6.1.15. Carburettor Pierburg adjustments 2Е2
      + 6.1.16. Carburettor Keihin adjustments
   + 6.2. The power supply system of engines with fuel injection
   + 6.3. The power supply system of the diesel engine
+ 7. Transmission
+ 8. A running gear
+ 9. A steering
+ 10. Brake system
+ 11. A body
+ 12. An electric equipment





6.1.12. Removal and carburettor installation
THE GENERAL DATA

Inlet pipe and the carburettor of the engine in volume of 1,8 l

1 – a heater of an inlet pipe;
2 – a sealing ring;
3 – a lining;
4 – an inlet pipe;
5 – a collar;
6 – a hose of heating of the carburettor;
7 – a flange;
8 – the carburettor;
9 – a hose of a supply of fuel;
10 – a lining of an inlet pipe;
11 – a sealing ring

PERFORMANCE ORDER
1. To disconnect a wire from "the minus" plug of the storage battery.
2. To remove the air filter (subsection 6.1.2 see).
3. To merge about half of cooling liquid (subsection 4.1 subitem 1-3 see).
4. To disconnect from the carburettor hoses of giving and plum of a cooling liquid, electroconducting, an accelerator cable, fuel and vacuum hoses.
5. To turn away a nut (or bolts) and to remove the carburettor from an inlet pipe. To remove a carburettor lining.
6. To establish the carburettor upside-down.